Blueendless Offline Clone Function M.2 NVME to SATA 2.5 3.5 2.5/3.5 Inch SSD HDD Duplicator Docking Station Enclosure Adapter

Blueendless offline Clone Function M.2 NVME to SATA 2.5 3.5 2.5/3.5 Inch Enclosure

 

Type: Dual Bay SSD HDD Cloner Duplicator Docking Station

Interface:Type C

Speed:NVME 10Gbps,2.5″/3.5″ SATA 6Gbps

Protocol:UASP&Trim

Support SSD/HDD: M.2 NVME SSD & 2.5″/3.5″ SATA SSD/HDD

  (please note:one of the slot is only support M.2 NVME SSD not or M.2 SATA SSD,the other slot support SATA SSD/HDD)

Support Capacity:M.2 NVME 8TB, 2.5″ 3.5″ SATA 20TB

Power Supply:12V 2A

Power Adapter:US,UK,EU,AU

Intall:Tool Free

 

Offline Clone:

NVME to 2.5″/3.5″ SATA

2.5″/3.5″ SATA to NVME

 

Write & Read with PC:

Single NVME

Single 2.5″/3.5″ SATA

NVME+2.5″/3.5″ SATA

 

please pay attention to the following matters when using the offline clone function.

1.back disk(B) must be larger capacity(eliminate space loss) than front disk(A),
Plug in identify Source Disk(front port) and Target Disk(back port)

Connect power supply and switch on power. (make sure that the USB cable is disconnected)
2.To avoid your disk file damaged,please don’t stop the device when it’s under clone function.
3.When copy disk,please make sure disk B is empty,or the former file in disk B will be loss.(if disk B has file before,and just want to copy from disk A,please don’t use offline clone function,just copy and paste on computer)
4.When offline copy the disk,please don’t connect the computer,if connect the computer,disk will be under reading,can not support copy(device heating is normally,as big hard disk operate will be hot)

5.if the clone is interrupted ,you need to restart the device and clone again.